If you do not find the link to the product you are trying to install here or need further help, contact us at info@drag2zero.com
Gen1 Cockpits
- D2Z Ergo poles
- D2Z Arm Rests
- D2Z Under Arm rest angled shims – Key information
- D2Z Width Adjustment Plates – Key Information
- D2Z Reach Adjustment Plate – Key Information
- D2Z Interface Plates
- D2Z BTA Bottle mount
- For installation guides regarding our plates, please go to YouTube Playlists.
Gen 2 Cockpits
- Universal Direct Mount (25mm riser) Document. Only compatible with bolt-up basebar systems and bolt spacings between 12.5mm and 39.5mm. M5 or M6 basebar bolts
- Universal Baseplate Mount Document. Compatible with both bolt-up and bolt-down systems. Requires bolt spacing between 12mm and 41mm. M5 or M6 basebar bolts
- Reach/Width Adjustment Plate Information Document. Compatible with both bolt-up and bolt-down systems. Requires bolt spacing between 14mm and 50mm. M5 or M6 basebar bolts
- 66 Assembly Instructions
Gen2 Width Adjustment Plates (for the ultimate fine-tuning of your position.)
Bike-Specific Mounting Kit (Please email us with your bike and the components you want to purchase).
- Shiv Tri Mono Conversion Plate
- Argon18 E-119tri+ Disc & E-117 with V1 Mono Conversion
- Canyon CF SLX and CFR 2022+ with V1 Mono Conversion
- CANYON 2019-2020 Conversion Kit
- Trek Pre 2022 Mounting Kit
- Trek 2022+ Mounting Kit Options
- Cervelo P5 EX10/EX14 Riser Mount
- Cervelo Aduro Bar
- FACTOR HANZO – To order, please see here, Drag2Zero.66 with Universal Gen1 Angled Shims
- FACTOR SLICK Pre 2025 with V1 Mono Conversion
- TriRig Alpha One – Requires TriRig DragonFly V2 plate and Drag2Zero.66 with Universal Angled Shims
- Ventun One – Requires Gen1 Universal Angled shims and can be ordered here, Drag2Zero.66 with Universal Angled Shims
- Orbea Ordu with V1 Mono Conversion Kit
- Scott Plasma 6 with V1 Mono Conversion Kit
- Cadex Mounting Kit
- Quintana Roo V-PRi with IIC assembly – Requires Gen1 Universal Angled shims and can be ordered here, Drag2Zero.66 with Universal Angled Shims
- Gen2 Round Bar Clamp system – Basebars with a 31.8mm dia clamping section require this.
- Giant Trinity 2025+ with V1 Mono Conversion Kit
Bikes that require a mono plate conversion kit have two options. Please check out our two mono-riser conversion kits. UCI riders will neede a V2 mono riser conversion kit.
For triathletes, we recommend the V1 Mono conversion plate. This is a lighter and thinner (more aerodynamic) plate system.
- V1 Mono Riser Conversion Kit Document (90mm, 120mm podium width options)
- V2 Mono Riser Conversion Kit Document (80mm, 105mm, 130mm podimun width options)
Computer Mounts
Grips
- Gen1 Grip for side button Di2 (Dual Grip)
- Gen1 Dual Grip for mechanical shifter (Dual grip)
- Gen1 SRAM Wireless Blips
- Gen2 AXS Wireless Grip Installation
- Gen2 SW-R9160 Grip installation
- Gen2 SW-R9150 Grip Installation
Bike Specific Assembly
Drivetrain
The bolts supplied are made of A2 Stainless steel, which is corrosion—and oxidation-resistant. Although structurally resistant to corrosion, A2 stainless steel can tarnish over time in humid environments.
To reduce the risk of rusting, bolts should be regularly wiped clean of sweat residue.