BTA Bottle Mount Holder for Drag2Zero arm rests
From: £42.00
For triathlons and longer-time trials, good hydration is key. The between-the-arms bottle position (BTA) has many advantages:
- Quick and easy access to hydration
- Fast bottle exchange at feed stations
- Locating the bottle between the arms does not incur a drag penalty, and in some rider positions it can reduce drag by 2 to 3 watts
We have designed a mount to be used with our .44 and Gen 1 armrests (Gen 1 armrests available pre-April 2024) which holds a standard bottle cage (if you have “long arm rests” ordered before April 2024, select the .44 version). Printed in a high-quality, strong and slightly flexible SLS, it can cope with the bumps and vibrations seen on the road. Available in 6 widths, dependent on the spacing of your armrests, this covers the majority of installations. There is some flexibility within the design, so deviating by +/- 5mm for in-between sizes is possible.
The mount comes with two sets of mount fixings set at the industry standard 64mm, providing 20mm fore-aft adjustment. Bolt any standard bottle cage directly on top of the mount.
To select the correct size see the measurements here
If you already have a GEN1 BTA and would like to order a Gen2 DUAL or Standard adapter please follow this link Gen2 BTA. You will need to select either “DUAL BTA on GEN1 BTA” or “Standard BTA on GEN1 BTA”.
Key Features
- Made from MJF 3D Printed Nylon
- Weight: approx. 40-60g (depending on size)
- Attaches to Drag2Zero arm rests via holes in the arm rests to be drilled by the customer. Designed specifically for Drag2Zero arm rests
- The bottle mount holder comes in 6 sizes. See here to select the correct size.
- All mounts have the same length and height dimensions at 100mm and 40mm respectively.
- If you are unsure what your measurements may be, please fit your arm rests first and then order a BTA
- For fitting instructions see here.
- Bottle cage not supplied
