Drag2Zero .44
£550.00
Orders placed today will be dispatched week commencing the 19th of May.
Designed for time trialists and triathletes looking to gain unparalleled performance and comfort.
The Drag2Zero 44 is a UCI-compliant system.
If you are unsure of what to order, please see our Suggested Order Document.
Are you struggling to know what to buy or looking for an aero bike fit? Why not check out our DRAG2ZERO System Build offer?
Please review our Bike Library for pictures of bikes to which we have fitted the system.
To mount a BTA onto your .44 system please take a look at our BTA mounts
Introducing Drag2Zero.44, the ultimate UCI-compliant cockpit delivering world-class aerodynamic performance alongside uncompromising adjustability. The 2nd generation of the Drag2Zero UCI under-arm ski pole systems ensures maximum aerodynamic efficiency delivering instant savings of up to 4 watts compared to our Hi Rise poles.
- Reduced drag – With no gap between the pole and forearm and improved aero profiling, .44 poles and your forearm become one object in the air with no flow separation between them. Combined with an optimised position from the high degree of adjustment offered by the mounting system, body drag is reduced resulting in an immediate drag reduction of up to 4 watts (compared with our Hi-Rise pole).
- Increased support and comfort – The extra contact between the pole and forearm allows the upper body to be more relaxed, increasing rider comfort and sustainability– for many of our test riders, this has been a real game changer allowing them to improve overall performance.
- Improved control – The more secure position boosts confidence and control through an improved armrest design and pole form.
- Increased adjustability – Through our unique interlocking mounting system, riders will have up to 125mm of reach adjustment and 6° of both positive and negative toe combined with a choice of angled shims between 15° to 30°. This will ensure riders can find the perfect level of adjustment. (For more information regarding system adjustment please look at the dimensions tab below).
As used by Vittoria Bussi for her UCI World Hour Record.
|
.44 Extension Set (Including Grip, extension closure panels) |
Material
3K Woven Carbon Fibre |
Weight
380g |
|
.44 Armrest Set (including bolts, not including foam) |
Material
3K Woven Carbon Fibre |
Weight
standard – 126g, narrow – 104g
|
|
.44 Finishing kit Set (4 x 40mm, 2 x 20mm, 2 x 10mm, 2 x 5mm, 4 x 2mm, 2 x profiled) |
Material
3D Printed Nylon |
Weight
102g |
|
Gen2 Pole Clamps Set (including covers, excluding nuts) |
Material
Aluminium |
Weight
178g |
| Gen2 Angled Shim Set
(15°, 20°, 25° & 30° options) |
Material
Aluminium |
Weight
15° – 50g, 20° – 58g, 25° – 64g, 30° – 74g |
| Gen2 Riser Set
(5mm, 10mm, 20mm & 50 mm options) |
Material
Aluminium |
Weight
5mm – 10g, 10mm – 20g, 20mm – 40g, 50mm – 112g |
| Universal Direct Mount Riser
(including covers, excluding nuts) |
Material
Aluminium |
Weight
66g |
| Universal Baseplate
(including covers, excluding nuts) |
Material
Aluminium |
Weight
82g |
| V1 Mono Plates
(excluding bolts) |
Material
Aluminium |
Weight
240g |
|
V2 Mono Plates (including covers, excluding bolts) |
Material Aluminium, Carbon Fibre, 3D Printed Nylon |
Weight 240g |
|
Gen2 Standard Computer Mount (including covers, including bolts) |
Material 3D Printed Nylon |
Weight 66g |
|
Gen2 Standard Computer Mount with GoPro Style attachment (Only suitable for devices under 100g) (including covers, including bolts) |
Material 3D Printed Nylon |
Weight 66g |
|
Gen2 Tower Computer Mount (including covers, including bolts) |
Material 3D Printed Nylon |
Weight 94g |
Mounting Kit Information
To mount our Gen2 risers, angled shims and pole clamps onto your bike basebar you will require a Gen2 Moutning kit option. Some bikes require specific solutions, these are listed below. The majority of bikes will require our universal mounting plate. This comes in two options, the Universal Baseplate or the Direct Mount. Information for these can be seen below on the corresponding links.
Universal Mounting Kit (can be directly mounted to a flat mounting surface basebars or proprietary risers).
If you require 25mm or more of risers, you would be better suited to the Universal Direct Mount, a 25mm riser.
- Universal Direct Mount (25mm riser) Document. Only compatible with bolt-up basebar systems and bolt spacings between 12.5mm and 39.5mm. M5 or M6 basebar bolts
- Universal Baseplate Mount Document. Compatible with both bolt-up and bolt-down systems. Requires bolt spacing between 12mm and 41mm. M5 or M6 basebar bolts
- Reach/Width Adjustment Plate Information Document. Compatible with both bolt-up and bolt-down systems. Requires bolt spacing between 14mm and 50mm. M5 or M6 basebar bolts
Gen2 Width Adjustment Plates (for the ultimate fine-tuning of your position.)
Bike-Specific Mounting Kit (Please email us with your bike and the components you want to purchase).
- Shiv Tri
- Argon18 E-119tri+ Disc V1 Mono Conversion
- Canyon Speedmax CF SLX and CFR 2022+
- CANYON 2019-2020 Conversion Kit
- Trek Pre 2022 Mounting Kit
- Trek 2022+ mounting kits
- Cervelo P5 EX10 / EX14 Conversion Kit
- Factor Hanzo – To order, please see here, Drag2Zero.44 with Universal Gen1 Angled shims
- Factor Slick Pre 2025
- TriRig Alpha One – Requires TriRig DragonFly V2 plate and Drag2Zero.44 with Universal Gen1 Angled shims
- Ventun One – Requires Gen1 Universal Angled shims and can be ordered here, Drag2Zero.44 with Universal Gen1 Angled shims
- Orbea Ordu
- Plasma 6
- Cadex Mounting Kit
- Quintana Roo V-PRi with IIC assembly – To order, please see here, Drag2Zero.44 with Universal Angled Shims
Bikes that require a mono plate conversion kit have two options. Please check out our two mono-riser conversion kits. UCI riders will require a V2 mono riser conversion kit.
For triathletes, we recommend the V1 Mono conversion plate. This is a lighter and thinner (more aerodynamic) plate system.
- V1 Mono Riser Conversion Kit Document (90mm, 120mm podium width options)
- V2 Mono Riser Conversion Kit Document (80mm, 105mm, 130mm podimun width options)
Bikes we know we fit that require our Universal Mounting kit
- Specialized Shiv TT Disc
- Colnago TT1
- Giant Trinity
- Scott Plasma 7
- Scott Plasma 5
- Felt IA
- Cube Aerium C68
- Ribble Ultra TriBMC Time Machine TM01 Flat cockpit
- Pinarello Bolide
- Pinarello Bolide TR+
- Cannondale Super slice
- Argon 18 e-119 tri plus 2019
- Felt IA 2.0 Triathlon Race
- 3T Brezza Basebar
- Pro Missile EVO Basebar
- Dolan TR 1
To reduce the risk of rusting, bolts should be regularly wiped clean of sweat residue.
.44 Computer Mount Instructions
For all other component instructions, please look at our Installation Help page.
When purchasing a .44 pole and .44 armrest only option, .44 armrests are supplied unslotted to allow you to custom position them specifically to your bike’s bolt spacing.
Grip Assembly Instructions
For information regarding UCI please refer to our Drag2zero 44 UCI document
44 Extension Height and Reach Document
44 Armrest Dimensions Document
V2 Mono Riser Conversion Kit Document
V1 Mono Riser Conversion Kit Document
Additional Reach Adjustment Plates Document
Gen2 Pole clamp and angled shims Document
Gen2 Pole Clamp Document
Gen2 Angled Shims Document
Base plate dimensions Document
20mm riser Document
Gen2 Width adjustment plate Document
Prototype .44 system used by Vittoria Bussi for her UCI World Hour Record where she attained a record-breaking distance of 50.267Km.
With the Gen2 system, you can now achieve stack up to 100mm, compared to the 60mm stack of the Gen1 system. Upgrade to the Gen2 system and experience the next level of strength and versatility for your cockpit setup.
