- Made in the UK from 6082 T6 Aluminium, fairing to hide cables made of printed nylon
- Black anodized
- Bolt spacing of 32mm
- Compatible with the other elements of the D2Z USPS System
- Pole clamp set dimensions
- Centre of each pole can be 15mm in or out of the bolt centres on your base bar as the clamp can be rotated (most proprietary pole clamps are central to bolt spacing). This allows a narrower arm set up than you might otherwise achieve, which can be key to becoming more aero. If you use a front hydration chamber, the closer setting may prevent access to it (as it does with the Scott Plasma). In this case we would advise the wider setting or using our angled shims with the interface plate instead of our pole clamp to keep the pole spacing of your existing pole clamps.
- Supplied in pairs
Pole clamp Set
£92.00
You do not need to order interface plates if you are buying our pole clamp set. Please note any interface plate refund will incur an admin cost.
Being able to tilt the pole clamp is key to being able to angle the D2Z poles and arm rests. Used in conjunction with our shims and spacers, this allows your arm rests and poles to be tilted at the same angle to achieve that aerodynamic, ergonomic position. The design of these pole clamps allows you to place your poles closer together than other pole clamps (see below for more information), and keep stack to a minimum we have designed them to be as shallow as possible. Our D2Z pole clamps are compatible with the other elements of the D2Z USPS System to create an aligned, streamlined set up for improved aerodynamics and aesthetics. Supplied with a fairing for the back of the pole clamp to hide the cables at the rear of the assembly.
In stock (can be backordered)
