+44 (0)1295 236117
D2Z Low and Hi rise poles
Shiv Tri with D2Z system
Trek Speed Concept with D2Z USP System
Orbea Ordu with D2Z USP System
Orbea Ordu with D2Z USP System
Shiv TT pre 2020 spacers

Underarm Ski Pole System sets and Bike Specific Solutions

From: £165.00

This is where you can order the USP System using our Hi or Low rise poles:

  • as a set for a standard twin podium bike (see here for compatibility information); and
  • for the following bikes that either have a mono podium or for which we have developed specific solutions: Specialized Shiv Disc Tri (mono podium), Specialized TT (dual podium pre 2020) where no cross brace is used, Canyon Speedmax CF SLX 9 (2019-2020), Canyon Speedmax CF SLX and CFR 2022+, Trek Speed Concept (pre 2022), Trek Speed Concept 2022 +, Cervelo P5, Shiv TT pre 2020, Cervelo P5 with Aduro bar Factor Slick, Orbea Ordu and Scott Plasma 6.  To be certain this solution is suitable for your bike please see the information below and photos of installations.

If you are looking to use our USP system on a twin podium bike and need to adjust your reach or podium width, head over to the Width and Reach Adjustment Plates page where you can see what solutions we have developed to solve this issue.

To see what height and reach can be achieved using our combination of angled shim, pole clamp and Hi/Low riser poles see here .  If you are using a conversion measurements are taken from the top of the plate.

You can also order bike specific solutions without poles and arm rests – these are supplied with angled shim, pole clamp (for a 22.2mm pole) and your selected bike specific solution.

You may also wish to consider adding the following to your order:

 

Select your shifter (not supplied, info requested to determine grip) * 

Free UK shipping on orders over £100. Shipping charges on orders outside UK calculated at checkout.
SKU: N/A Category:

Each kit ordered on this page comprises the following (click on the component for more information):

For more information about each of the components included in the kits, head over to the specific product pages by clicking on the links above.

Bike Specific Solutions

Consisting of one or two plates or spacers mounted on your bike’s basebar or risers, to allow our angled shims and pole clamp to be used.  Allows you to

For further information, click on the bikes below and also see the picture gallery

**All parts detailed in information guides are to be fitted**

 

  • Trek Speed Concept pre 2022
  • Shiv Tri Disc (mono podium)  
  • Canyon Speedmax CF SLX 9 (2019-2020)
  • Cervelo Aduro Bar
  • Cervelo P5 or Px
  • Scott Plasma 6 
  • Factor Slick
  • Canyon CF SLX and CFR 2022+ 
  • Orbea Ordu
  • Trek Speed Concept 2022 – this requires two specifically designed shims to sit either on the Trek basebar (for use when using our risers and angled shims) or in the Trek risers (for use when using Trek risers and our angled shims) which you can see here, our angled shims and pole clamps are mounted on top.
  • Shiv TT pre 2020 – when not using the cross brace, to use our system you need two small inserts that sit in the Shiv basebar to make it flat (see gallery above), our angled shims then mount on top.
  • Shiv TT post 2020 – standard twin podium set up, no plate or adapter required
  • Giant Trinity – this does not require a conversion plate – see here for more information. If you are ordering a kit for the Giant and are also ordering our spacers, you will need to ensure you order the 5mm spacers, along with any additional spacers to achieve the stack you need.
  • Factor Hanzo – this does not need an adapter plate – our angled shims, pole clamps and poles will mount directly onto the Hanzo universal adapter, but please make a note on your order that it is for a Hanzo.
  • Felt IA – the bolt spacing on some basebars supplied with the Felt is too small for the standard twin podium set up to work.  It is possible for our USP System to be installed using the width adjustment plates. Please email us for more information.

 

Related products